The steering clutches of bulldozers are mostly wet multi-disc clutches with copper-based powder metallurgy liners sintered on the friction plates. It is mainly composed of outer drum, pressure plate, friction plate, active gear plate, inner drum, piston, large spring, small spring, bolt and so on. When the spring causes the pressure plate to tightly press the inner and outer gear plates on the inner drum, the clutch transmits power to the final drive. The following is the structure diagram and part numbers of the steering clutch of Shantui SD16 bulldozer. If there is a need to replace some parts, please report to our online customer service according to the number!

1 Disc spring: 16Y-16-00002

2Inner drum: 16Y-16-00009

3 Sealing ring: 16Y-16-00007

4 pressure plate: 16Y-16-01002

5 Pistons: 16Y-16-01001

6 Sealing ring: 16Y-16-00008

7 Countersunk rivets 6×20: GB869-76

8 reel: 16Y-16-00003

9 bolts: 01010-3102

10 Washer: 01602-01030

11 Locking plate: 16Y-16-00006

12 positioning pin: 16Y-16-00004

13 bolts: 16Y-16-00005

14 nut: 16Y-16-00025

15 Friction plate: 16Y-16-02000

16 inner gear piece: 16Y-16-00010

17 Internal tooth piece: 16Y-16-00011

18 Outer drum: 16Y-16-00001

In addition: Shantui SD16 steering clutch assembly price is 3100 yuan